2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1
2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1
KYOSHO FAZER D2 FZD2 Series readyset Toyota SPRINTER TRUENO AE86Â
An all new performance based drift platform with a newly designed electronics. Making the FAZER D2 the new standard for radio control Drift.
New FAZER D2 brings the fun of drifting to the FAZER series with an easy-to-enjoy RWD model!
Specifically designed drift-chassis is equipped with gyro unit for easy drift control and features the pure realism of Kyoshoâs ULTRA SCALE BODY. This chassis also allows for adjustments to the wheelbase and tread, making it compatible with a variety of bodies. Setting and tuning options let you deep dive into the world of drift driving, and this Readyset package makes it accessible for anyone!
Kyoshoâs meticulously finished âULTRA SCALE BODYâ faithfully reproduces the smallest details of the car's body including light buckets, bumpers and mirrors to create a realistic âaction display-quality modelâ. The âULTRA SCALE BODY PLUSâ takes this even further by eliminating mounting holes that are drilled into the polycarbonate body.
Scale
1/10
Length (Body included)
462mm
Width (Body width)
195mm
Width (Chassis)
212mm
Height
134mm
Ground Clearance
12mm
Chassis Type
RWD DRIFT CAR
Wheel Base
260mm (240-273mm)
Tread
F:172mm R:170mm
Weight
1,450g
Motor
G22 brushed 540-size motor
Gear Ratio
9.1 : 1
1st Deceleration
3.5 : 1
2nd Deceleration
2.6 : 1
Tire Diameter
F:63mm R:63mm
Tire Width
F:24mm R:24mm
RC System
Syncro KT-231P+
Approximate Run Time
50-60mins
Readyset contents
âCompleted chassis with R/C radio installed âFactory assembled body complete with color scheme âSyncro KT-231P+ transmitter â1.5/2.0mm Hexagonal wrench âCross wrench (small) âSetting change parts
Required For Operation (Not Included)
4 x AA batteries for transmitter Battery for chassis (recommended: 7.2V Ni-MH battery) Charger for battery for chassis
Toyotaâs AE86 Sprinter Trueno is still popular today, nearly forty years after its launch in 1983. Kyosho has immaculately reproduced this ultra-scale body with molded plastic front and rear bumpers and also the AE86âs signature retractable headlights that can be (manually) open and closed.
Plastic drift tires are included as standard and provide the optimal balance of drift slide and control.
Wheel hubs are decorated with dummy brake calipers and discs, dramatically elevating the scale appearance. The rear drive unit uses a spool (rigid) axle without a differential function to support smooth drifting.
RETRACTABLE LIGHT
The optional Micro Servo (ON-MS18) and LED Light Unit Halogen Vintage (97054-4HR) or LED Light Unit White (97054-4R-B) and Supercharger SetăServo Mount PlateďźFAB707-01SMďźă can be installed.
Newly designed concealed body mounts mean the fixing posts and pins do not protrude externally, allowing a more realistic appearance of the exquisite ultra-scale body.
Battery holder can accommodate different size battery packs so most standard battery packs for R/C cars can be mounted.
Long-span front double wishbone suspension provides plenty of steering angle with adjustable caster, roll center, and other geometry.
2-way adjustable Ackerman.
4-way adjustable caster angle.
2-way adjustable roll center.
ADJUSTABLE MOTOR MOUNT
High mount position of the motor induces moderate roll characteristics. By changing the motor position, the rear tire grip can be adjusted.
Motor mount eliminates need for tricky gear backlash (mesh) adjustment. Gear ratio can be changed using the elongated hole to fit Kyosho 48P 16-37T pinion gears.
Advanced drift stability is achieved through the special 4-gear design that utilizes the motor's counter torque to maximize rear traction and grip.
DIFFERENTIAL
The rear drive unit uses a spool (rigid) axle without a differential function to support smooth drifting.
The gear diff and ball diff set for Kyoshoâs 2WD competition buggy can be used. This allows you to adjust the rear tire traction. *Must be used in conjunction with the separately sold universal swing shaft (No.FAW305).
No.UMW604B Gear Diff. Set
No.UMW602B Ball Diff. Set
SHOCK
Oil shocks are equipped as standard for optimal chassis roll and feature red anodized shock caps.
GEAR COVER
By installing a gear cover, damage to the gears caused by pebbles or sand when driving in a parking lot can be prevented.
Full ball bearing (16 pcs) specification drive train
This drifting package set is ideal even for those who have never even driven a drift R/C car before.
DRIFT RECIEVER
Equipped with a newly developed KRG-331D receiver incorporating built-in gyro unit optimized for drift driving. The gyro moderates both steering and throttle (speed control), and the gain (sensitivity) of each can be adjusted with a dial.
ESC (ELECTRONIC SPEED CONTROLLER)
Large capacity 60A KYOSHO SPEED HOUSE ESC (super plug connector) features three modes: FWD/Brake/REV (initial setting). FWD/Brake, and FWD/REV.
The ESC (Electronic Speed Controller) is mounted at the rear of the car to optimize weight distribution for drifting. The ESC is fixed in a special tray that can be removed with a single screw for easy maintenance.
New KS4072-06W servo delivers ideal steering characteristics for drift driving and works in combination with newly developed gyro unit that produces optimal counter-steer control.Additionally, the servo is easy to replace.
Equipped with G22 brushed 540-size motor with easy to manage power settings.
Adjusts the throttle in small increments so the model will not move at neutral.
Adjusts the amount of movement to the forward and brake sides.
When the power is switched ON, both LED lights will light up.
Adjusts the steering in small increments so the model will run straight.
To adjust Steering Angle
Turn model to left or right.
Controls forward movement and braking functions.
$96.25
Original: $274.99
-65%
2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1â
$274.99
$96.25
More Images
2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1
KYOSHO FAZER D2 FZD2 Series readyset Toyota SPRINTER TRUENO AE86Â
An all new performance based drift platform with a newly designed electronics. Making the FAZER D2 the new standard for radio control Drift.
New FAZER D2 brings the fun of drifting to the FAZER series with an easy-to-enjoy RWD model!
Specifically designed drift-chassis is equipped with gyro unit for easy drift control and features the pure realism of Kyoshoâs ULTRA SCALE BODY. This chassis also allows for adjustments to the wheelbase and tread, making it compatible with a variety of bodies. Setting and tuning options let you deep dive into the world of drift driving, and this Readyset package makes it accessible for anyone!
Kyoshoâs meticulously finished âULTRA SCALE BODYâ faithfully reproduces the smallest details of the car's body including light buckets, bumpers and mirrors to create a realistic âaction display-quality modelâ. The âULTRA SCALE BODY PLUSâ takes this even further by eliminating mounting holes that are drilled into the polycarbonate body.
Scale
1/10
Length (Body included)
462mm
Width (Body width)
195mm
Width (Chassis)
212mm
Height
134mm
Ground Clearance
12mm
Chassis Type
RWD DRIFT CAR
Wheel Base
260mm (240-273mm)
Tread
F:172mm R:170mm
Weight
1,450g
Motor
G22 brushed 540-size motor
Gear Ratio
9.1 : 1
1st Deceleration
3.5 : 1
2nd Deceleration
2.6 : 1
Tire Diameter
F:63mm R:63mm
Tire Width
F:24mm R:24mm
RC System
Syncro KT-231P+
Approximate Run Time
50-60mins
Readyset contents
âCompleted chassis with R/C radio installed âFactory assembled body complete with color scheme âSyncro KT-231P+ transmitter â1.5/2.0mm Hexagonal wrench âCross wrench (small) âSetting change parts
Required For Operation (Not Included)
4 x AA batteries for transmitter Battery for chassis (recommended: 7.2V Ni-MH battery) Charger for battery for chassis
Toyotaâs AE86 Sprinter Trueno is still popular today, nearly forty years after its launch in 1983. Kyosho has immaculately reproduced this ultra-scale body with molded plastic front and rear bumpers and also the AE86âs signature retractable headlights that can be (manually) open and closed.
Plastic drift tires are included as standard and provide the optimal balance of drift slide and control.
Wheel hubs are decorated with dummy brake calipers and discs, dramatically elevating the scale appearance. The rear drive unit uses a spool (rigid) axle without a differential function to support smooth drifting.
RETRACTABLE LIGHT
The optional Micro Servo (ON-MS18) and LED Light Unit Halogen Vintage (97054-4HR) or LED Light Unit White (97054-4R-B) and Supercharger SetăServo Mount PlateďźFAB707-01SMďźă can be installed.
Newly designed concealed body mounts mean the fixing posts and pins do not protrude externally, allowing a more realistic appearance of the exquisite ultra-scale body.
Battery holder can accommodate different size battery packs so most standard battery packs for R/C cars can be mounted.
Long-span front double wishbone suspension provides plenty of steering angle with adjustable caster, roll center, and other geometry.
2-way adjustable Ackerman.
4-way adjustable caster angle.
2-way adjustable roll center.
ADJUSTABLE MOTOR MOUNT
High mount position of the motor induces moderate roll characteristics. By changing the motor position, the rear tire grip can be adjusted.
Motor mount eliminates need for tricky gear backlash (mesh) adjustment. Gear ratio can be changed using the elongated hole to fit Kyosho 48P 16-37T pinion gears.
Advanced drift stability is achieved through the special 4-gear design that utilizes the motor's counter torque to maximize rear traction and grip.
DIFFERENTIAL
The rear drive unit uses a spool (rigid) axle without a differential function to support smooth drifting.
The gear diff and ball diff set for Kyoshoâs 2WD competition buggy can be used. This allows you to adjust the rear tire traction. *Must be used in conjunction with the separately sold universal swing shaft (No.FAW305).
No.UMW604B Gear Diff. Set
No.UMW602B Ball Diff. Set
SHOCK
Oil shocks are equipped as standard for optimal chassis roll and feature red anodized shock caps.
GEAR COVER
By installing a gear cover, damage to the gears caused by pebbles or sand when driving in a parking lot can be prevented.
Full ball bearing (16 pcs) specification drive train
This drifting package set is ideal even for those who have never even driven a drift R/C car before.
DRIFT RECIEVER
Equipped with a newly developed KRG-331D receiver incorporating built-in gyro unit optimized for drift driving. The gyro moderates both steering and throttle (speed control), and the gain (sensitivity) of each can be adjusted with a dial.
ESC (ELECTRONIC SPEED CONTROLLER)
Large capacity 60A KYOSHO SPEED HOUSE ESC (super plug connector) features three modes: FWD/Brake/REV (initial setting). FWD/Brake, and FWD/REV.
The ESC (Electronic Speed Controller) is mounted at the rear of the car to optimize weight distribution for drifting. The ESC is fixed in a special tray that can be removed with a single screw for easy maintenance.
New KS4072-06W servo delivers ideal steering characteristics for drift driving and works in combination with newly developed gyro unit that produces optimal counter-steer control.Additionally, the servo is easy to replace.
Equipped with G22 brushed 540-size motor with easy to manage power settings.
Adjusts the throttle in small increments so the model will not move at neutral.
Adjusts the amount of movement to the forward and brake sides.
When the power is switched ON, both LED lights will light up.
Adjusts the steering in small increments so the model will run straight.
To adjust Steering Angle
Turn model to left or right.
Controls forward movement and braking functions.
Product Information
Shipping & Returns
Description
KYOSHO FAZER D2 FZD2 Series readyset Toyota SPRINTER TRUENO AE86Â
An all new performance based drift platform with a newly designed electronics. Making the FAZER D2 the new standard for radio control Drift.
New FAZER D2 brings the fun of drifting to the FAZER series with an easy-to-enjoy RWD model!
Specifically designed drift-chassis is equipped with gyro unit for easy drift control and features the pure realism of Kyoshoâs ULTRA SCALE BODY. This chassis also allows for adjustments to the wheelbase and tread, making it compatible with a variety of bodies. Setting and tuning options let you deep dive into the world of drift driving, and this Readyset package makes it accessible for anyone!
Kyoshoâs meticulously finished âULTRA SCALE BODYâ faithfully reproduces the smallest details of the car's body including light buckets, bumpers and mirrors to create a realistic âaction display-quality modelâ. The âULTRA SCALE BODY PLUSâ takes this even further by eliminating mounting holes that are drilled into the polycarbonate body.
Scale
1/10
Length (Body included)
462mm
Width (Body width)
195mm
Width (Chassis)
212mm
Height
134mm
Ground Clearance
12mm
Chassis Type
RWD DRIFT CAR
Wheel Base
260mm (240-273mm)
Tread
F:172mm R:170mm
Weight
1,450g
Motor
G22 brushed 540-size motor
Gear Ratio
9.1 : 1
1st Deceleration
3.5 : 1
2nd Deceleration
2.6 : 1
Tire Diameter
F:63mm R:63mm
Tire Width
F:24mm R:24mm
RC System
Syncro KT-231P+
Approximate Run Time
50-60mins
Readyset contents
âCompleted chassis with R/C radio installed âFactory assembled body complete with color scheme âSyncro KT-231P+ transmitter â1.5/2.0mm Hexagonal wrench âCross wrench (small) âSetting change parts
Required For Operation (Not Included)
4 x AA batteries for transmitter Battery for chassis (recommended: 7.2V Ni-MH battery) Charger for battery for chassis
Toyotaâs AE86 Sprinter Trueno is still popular today, nearly forty years after its launch in 1983. Kyosho has immaculately reproduced this ultra-scale body with molded plastic front and rear bumpers and also the AE86âs signature retractable headlights that can be (manually) open and closed.
Plastic drift tires are included as standard and provide the optimal balance of drift slide and control.
Wheel hubs are decorated with dummy brake calipers and discs, dramatically elevating the scale appearance. The rear drive unit uses a spool (rigid) axle without a differential function to support smooth drifting.
RETRACTABLE LIGHT
The optional Micro Servo (ON-MS18) and LED Light Unit Halogen Vintage (97054-4HR) or LED Light Unit White (97054-4R-B) and Supercharger SetăServo Mount PlateďźFAB707-01SMďźă can be installed.
Newly designed concealed body mounts mean the fixing posts and pins do not protrude externally, allowing a more realistic appearance of the exquisite ultra-scale body.
Battery holder can accommodate different size battery packs so most standard battery packs for R/C cars can be mounted.
Long-span front double wishbone suspension provides plenty of steering angle with adjustable caster, roll center, and other geometry.
2-way adjustable Ackerman.
4-way adjustable caster angle.
2-way adjustable roll center.
ADJUSTABLE MOTOR MOUNT
High mount position of the motor induces moderate roll characteristics. By changing the motor position, the rear tire grip can be adjusted.
Motor mount eliminates need for tricky gear backlash (mesh) adjustment. Gear ratio can be changed using the elongated hole to fit Kyosho 48P 16-37T pinion gears.
Advanced drift stability is achieved through the special 4-gear design that utilizes the motor's counter torque to maximize rear traction and grip.
DIFFERENTIAL
The rear drive unit uses a spool (rigid) axle without a differential function to support smooth drifting.
The gear diff and ball diff set for Kyoshoâs 2WD competition buggy can be used. This allows you to adjust the rear tire traction. *Must be used in conjunction with the separately sold universal swing shaft (No.FAW305).
No.UMW604B Gear Diff. Set
No.UMW602B Ball Diff. Set
SHOCK
Oil shocks are equipped as standard for optimal chassis roll and feature red anodized shock caps.
GEAR COVER
By installing a gear cover, damage to the gears caused by pebbles or sand when driving in a parking lot can be prevented.
Full ball bearing (16 pcs) specification drive train
This drifting package set is ideal even for those who have never even driven a drift R/C car before.
DRIFT RECIEVER
Equipped with a newly developed KRG-331D receiver incorporating built-in gyro unit optimized for drift driving. The gyro moderates both steering and throttle (speed control), and the gain (sensitivity) of each can be adjusted with a dial.
ESC (ELECTRONIC SPEED CONTROLLER)
Large capacity 60A KYOSHO SPEED HOUSE ESC (super plug connector) features three modes: FWD/Brake/REV (initial setting). FWD/Brake, and FWD/REV.
The ESC (Electronic Speed Controller) is mounted at the rear of the car to optimize weight distribution for drifting. The ESC is fixed in a special tray that can be removed with a single screw for easy maintenance.
New KS4072-06W servo delivers ideal steering characteristics for drift driving and works in combination with newly developed gyro unit that produces optimal counter-steer control.Additionally, the servo is easy to replace.
Equipped with G22 brushed 540-size motor with easy to manage power settings.
Adjusts the throttle in small increments so the model will not move at neutral.
Adjusts the amount of movement to the forward and brake sides.
When the power is switched ON, both LED lights will light up.
Adjusts the steering in small increments so the model will run straight.
To adjust Steering Angle
Turn model to left or right.
Controls forward movement and braking functions.
$96.25
Original: $274.99
-65%
2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1â
![2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1](/images/supergdriftusa.shop/images/product/preorder-2wd-fazer-fzd2-ae86-white-adjustable-wheelbase-rwd-1-10-drift-car-kyosho-34501t1-1.png)
![KT-231P+ TRANSMITTER [Syncro FHSS]](https://rc.kyosho.com/media/wysiwyg/kyosho/sp_page/FAZER_D2_SprinterTruenoAE86/trsmt_main-pc.jpg)
![2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1 - Image 2](/images/supergdriftusa.shop/images/product/2wd-fazer-fzd2-rtr-readyset-toyota-tundra-black-adjustable-wheelbase-ready-to-run-rwd-1-10-drift-car-kyosho-34531t1-7.jpg)
![2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1 - Image 3](/images/supergdriftusa.shop/images/product/2wd-fazer-fzd2-rtr-readyset-toyota-tundra-black-adjustable-wheelbase-ready-to-run-rwd-1-10-drift-car-kyosho-34531t1-6.png)
![2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1 - Image 4](/images/supergdriftusa.shop/images/product/2wd-fazer-fzd2-rtr-readyset-toyota-tundra-black-adjustable-wheelbase-ready-to-run-rwd-1-10-drift-car-kyosho-34531t1-5.jpg)
![2WD Fazer FZD2 RTR - ReadySet AE86 White - Adjustable Wheelbase - Ready to Run RWD 1/10 Drift Car [Kyosho] 34501T1 - Image 5](/images/supergdriftusa.shop/images/product/2wd-fazer-fzd2-rtr-readyset-toyota-tundra-black-adjustable-wheelbase-ready-to-run-rwd-1-10-drift-car-kyosho-34531t1-4.jpg)
